Connecting The Mbr814X To Your Lan; First, Install The Router - NETGEAR MBR814X Reference Manual

Reference Manual for the Mobile Broadband Router MBR814X

Connecting the MBR814X to Your LAN

This section provides instructions for connecting the MBR814X router.
There are three steps to connecting your router:
1. Install the router.
2. Log in to the router.
3. Connect to the Internet.
Note: Follow the steps below to connect your router to your network. Before you begin,
locate the configuration information from your Internet Service Provider (ISP).

First, install the router.

1. Turn off your computer.
2. Check the router to make sure that the broadband card is securely inserted in the slot in the
back of the router. Please refer to the applicable sections in the appendix or the user manual
provided with the broadband card for additional installation information.
3. Connect the Ethernet cable that came with your router into a LAN port on the router such as
LAN port 4, and then connect the other end into the Ethernet port of your computer.
Figure 3-1
4. Plug in the power adapter to your router. Verify the following:
3-4
v1.0, January 2006