Controls - Axiom Pro Variants - Raymarine axiom pro 9 RVX Installation Instructions Manual

Powering off the display
1. Swipe your finger from left to right across the Power button swipe
area.
The Shortcuts menu is displayed.
2. Press and hold the Power symbol until the screen switches off.
Note: When powered off, the unit may still draw a small amount of
power from the battery, if this is a concern unplug the power supply
or switch off at the breaker.
Switching on and off at the breaker
If you wish to ensure that the MFD is not consuming any power
then it must be switched off at the breaker or have the power cable
unplugged.
When the breaker is switched back on, or the cable is reconnected,
the MFD will resume in the same power state that it was in when
it was switched off.
Controls — Axiom Pro variants
In addition to its touchscreen, the Axiom Pro also includes physical
buttons that can be used to control the MFD.
10