Raymarine axiom pro 9 RVX Installation Instructions Manual page 309

Photo & Video recording tab
Settings
Save files to:
ClearCruise tab
Settings
Highlight detected
objects
Beep on detection
Camera motion tab
Settings
Camera height
above the
waterline
Set forward
position
Man overboard
Dangerous AIS
targets
Dangerous MARPA
targets
Enable scan
Scan width
Scan speed
Camera app
Description
Determines the save location for photos and
video recordings.
Note: External SD 1 and USB Media are
available when using the RCR-SDUSB
Accessory.
Description
Uses proprietary ClearCruise™ technology to
highlight and track objects detected in the water.
When enabled the MFD will beep when an object
is detected.
Description
To ensure correct alignment of the camera for
tracking purposes the height the camera has
been installed at, above the waterline, must be
set.
Allows you to adjust the Forward position for you
camera
Adjust the camera so that it is point in forward
and select Save to set the forward position.
Enables and disables automatic tracking of a
MOB alarm.
The most recent target is tracked.
Enables and disables automatic tracking of
Dangerous AIS targets.
The most recent target is tracked.
Enables and disables automatic tracking of
Dangerous Radar targets.
The most recent target is tracked.
Enables and disables Surveillance mode.
Surveillance mode pans the camera left to right
continuously to the specified speed
Determines how far the camera pans from left to
right when in Surveillance mode.
Determines the speed at which the camera pans
from left to right when in Surveillance mode.
Options
• SD 1
• External SD 1 USB
Media
Options
• On
• Off
• On
• Off
Options
• 0ft to 99ft
Displays the forward
alignment picture
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• Narrow
• Medium
• Wide
• Slow
• Medium
• Fast
143