Connecting To A Wireless Display - Raymarine axiom pro 9 RVX Installation Instructions Manual

With a Splitscreen app page displayed:
1. Select Edit split ratio from the Page settings tab: Menu > Settings
> Page settings > Edit split ratio.
2. Drag the Resize icon to create the desired split ratio.
3. Select Save.

3.14 Connecting to a wireless display

Your MFD can be connected to a wireless display using an external
dongle or a display that has built-in support. When connected the
MFDs screen is mirrored on the wireless display.
1. Follow the instructions provided with your wireless display/dongle
to set up the device.
2. Select the display icon found under Wireless display: on the This
Display tab of the Settings menu: (Homescreen > This Display >
Wireless Display:).
Your MFD will search for available displays.
3. Select the display you want to use.
4. If your MFD has Wi-Fi Sharing enabled then a pin number is
displayed on the wireless display, input this pin number when
requested by your MFD.
5. You may also be requested to allow the MFD to connect
automatically in future, select Yes or No as appropriate on your
wireless display.
Your MFD screen will now be displayed on the select device.
6. To allow the wireless display to connect each time your MFD is
powered on, then enable Connect on power up from the pop-over
options.
34