Controls - Axiom Pro Variants; Powering On The Display; Powering Off The Display - Raymarine axiom pro 9 RVX Installation Instructions Manual

3.2 Controls — Axiom Pro variants
In addition to its touchscreen, the Axiom Pro also includes physical buttons that can be used to
control the MFD.
1. Touchscreen — The touchscreen can be used to control the MFD.
2. Home — Press to display the Homescreen.
3. Menu — Press to open or close menus.
4. Uni-controller — The Uni-controller consists of a center OK button, Directional controls and
a Rotary knob.
5. User Programmable Button — You can select a function for this button.
6. Waypoint / MOB — Press momentarily to place a waypoint at your vessel's location. A long press
activates the Man overboard alarm.
7. Power — Press to power on the MFD. When powered on press to open the Shortcuts page.
8. MicroSD card reader — 2 x MicroSD card slots.
9. Pilot — Press momentarily to display or hide the Pilot sidebar. A long press engages the autopilot
in locked heading mode, or disengages an active autopilot.
10. Switch pane — Press momentarily to switch the active pane in a splitscreen page. A long press
expands the selected pane.
11. Back — Press to return to the previous menu or dialog.

Powering on the display

1. Press the power button to power on the display.

Powering off the display

1. Press and hold the Power button for approximately 6 seconds.
Note: When powered off, the unit may still draw a small amount of power from the battery, if this is
a concern unplug the power supply or switch off at the breaker.
18