Raymarine axiom pro 9 RVX Installation Instructions Manual page 270

Settings
Background
View mode
Transducer tab
Settings
Transducer
Display depth as
Speed transducer
Calibrate speed
Enable
temperature
sensor
Calibrate temp
Sounder tab
Settings
Sounder name
Ping enable
Ping rate limit
Power mode
Ping rate
104
Description
Changes the color used for the app background.
In GPS track mode the boat icon will remain
in the same position and bottom structure and
target detail will move in true relation to your
vessel movements.
In Scrolling image mode the sonar pings at a
constant speed and displays a scrolling image
behind the boat icon.
Description
Allows selection of Sonar transducer.
Determines the position from where depth
readings are taken from.
Allows selection of Speed transducer.
Allows you to enter an offset between actual
measured speed and the current speed
displayed by your transducer.
Enables and disables the selected transducer's
temperature sensor.
Allows you to enter an offset between actual
measured water temperature and the current
temperature displayed by your transducer.
Description
Allows you to rename your sonar module.
Enables and disables transducer ping.
Allows you to restrict the transducer's maximum
ping rate to suit current conditions.
Adjusts the transducer's signal strength. In Auto
the sonar module will automatically determine
the optimal power based on current depth,
speed and bottom signal. In Manual you can
adjust the power to the desired level.
Hyper ping should be used at speeds of up to
40 knots in shallower waters (6 metres or less).
When the depth reaches 6 metres or above the
ping rate will automatically reduce to normal until
depth conditions are met.
Options
List of colors.
• GPS track
• Scrolling image
Options
List of available
transducers.
• Below keel
• Below waterline
• Below transducer
List of available
transducers.
Offset value.
• On
• Off
Offset value.
Options
Onscreen keyboard.
• On
• Off
• 1 to 100
• 1 to 100
• Normal
• Hyper