Inserting A Microsd Card - Axiom Pro Variants - Raymarine axiom pro 9 RVX Installation Instructions Manual

Removing a MicroSD card
1. Select Eject SD card from the Import/export page: Homescreen > My data > Import/export >
Eject SD card.
2. Remove the MicroSD card from the Rear of the MFD.
3. Ensure you close the card reader's cover.
Inserting a MicroSD card — Axiom Pro variants
1. Open the card reader door.
2. Pull down the card reader cover.
3. Insert the card into a card slot and push until it clicks into place.
Note: When inserting a card into the lower card slot the memory card must be orientated with the
contacts pointing upwards.
Removing a MicroSD card - Axiom Pro
With the card reader door open and cover pulled down:
1. Push the card in until it clicks.
2. Pull the card free from the card slot.
Caution: Ensure card reader cover or door is securely closed
To prevent water ingress and consequent damage to the product, ensure that the
card reader door or cover is firmly closed.
Caution: Care of chart and memory cards
To avoid irreparable damage to and / or loss of data from chart and memory cards:
• Ensure that chart and memory cards are fitted the correct way around. DO
NOT try to force a card into position.
• DO NOT use a metallic instrument such as a screwdriver or pliers to insert or
remove a chart or memory card.
Set up
25