Raymarine CP200 Installation Instructions Manual page 41

9.1 Technical specification
Physical specification
Dimensions
Weight
Power specification
Nominal supply voltage
Operating voltage range
Power consumption
Current
Fuse / breakers
Sonar / DownVision specification
Channels 2 x CHIRP (1 x sonar and 1 x DownVision)
Beam • Sonar — conical beam.
coverage
• DownVision — Wide (port / starboard)
and thin (fore / aft) fan beam.
Depth Typical depth performance of 183 m (600
ft). Applies to both Sonar and DownVision
channels.
SideVision specification
Channels 2 x CHIRP
Beam Port- and starboard-facing fan beams —
coverage wide (port / starboard) and thin (fore / aft) .
Range Up to 183 m (600 ft).
Note: Range performance is
dependent on many factors, including
water quality, transducer installation, and
reflectivity of targets and structure.
Environmental specification
Operating temperature
Storage temperature
Relative humidity
Waterproof rating
• Width: 225 mm (8.9 in).
• Height: 162 mm (6.4 in).
• Height (including
connectors): 171 mm
(6.7 in).
• Depth: 72 mm (2.8 in).
0.6 kg (1.32 lbs)
12 V / 24 V dc
10.8 V to 31.2 V dc
5.6 W (maximum)
1 A peak
5 A
0°C to +55°C (+32°F to
+131°F)
–30°C to +70°C (-22°F to
+158°F)
95%
IPX6 and IPX7
Conformance specification
Conformance • EN 60945:2002
• EMC Directive
2004/108/EC
• Australia and New
Zealand: C-Tick,
Compliance Level 2
CP100 / CP200