Section 3 − Definitions; Additional Safety Symbols And Definitions - Miller FieldPro Smart Feeder CE Owner's Manual

3-1. Additional Safety Symbols And Definitions

.
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Wear dry insulating gloves. Do not touch electrode (wire) with bare hand. Do not wear wet or damaged gloves.
Protect yourself from electric shock by insulating yourself from work and ground.
Keep your head out of the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use ventilating fan to remove fumes.
Keep flammables away from welding. Do not weld near flammables.
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Do not weld on drums or any closed containers.
?
Disconnect input plug or power before working on machine.
SECTION 3 − DEFINITIONS
Safe1 2012−05
Safe57 2012−05
Safe58 2012−06
Safe59 2012−05
Safe60 2012−06
Safe61 2012−06
Safe62 2012−06
Safe63 2012−06
Safe64 2012−06
Safe30 2012−05
OM-264234 Page 9