1. Assemble installation frame:
– Place mounting plates
– Install rear interlock.
– Bolt the DIN rails
2. Bolt the assembled installation frame to the cubicle mounting plate.
No further work to the cubicle mounting plate is required.
The same rear interlock combinations can be implemented regardless of whether or not the
installation aid is used.
Note
For installation instructions, please refer to the operating instructions for the rear interlock.
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02
①
on the molded case circuit breaker.
②
to the adapter plates.
Accessories
4.7 Locking and interlocking
291