Make Pattern Visible; Automatically Lock; Power Key Instantly Locks; Secure Start-Up - Kyocera DuraForce PRO User Manual

Note: The fingerprint recognition performance depends on your usage. The phone may have
an issue in registering or recognizing fingerprints that have scars or worn down ridges,
or if you have scratches on the sensor surface.
Tip: To improve fingerprint recognition performance, register the fingerprints that are used
most often to perform tasks on the phone.
1. From the Home screen, tap Apps
2. Read the message and tap CONTINUE.
3. Select your backup screen lock method.
4. Read the message and tap NEXT.
5. Touch the tip of your finger on the sensor and lift after you feel a vibration. Repeat it 20
times.
6. If required, name the fingerprint and tap DONE.

Make Pattern Visible

You can hide the trace of your pattern as you draw it. This setting appears only when you set
Screen lock type to Pattern.
1. From the Home screen, tap Apps
2. Tap Make pattern visible to turn on.

Automatically Lock

Set the time delay to activate the screen lock feature after the device enters sleep mode. This
setting is available only when you have enabled one of the lock settings.
1. From the Home screen, tap Apps
2. Select a time to elapse before the screen locks.

Power Key Instantly Locks

Activate the screen lock feature by pressing the Power button. This setting appears only when
you set one of the lock settings.
1. From the Home screen, tap Apps
2. Tap Power key instantly locks to turn on.

Secure Start-up

Set further protect your phone by requiring your Pattern, PIN, or Password before it starts up.
Settings
> Settings > Lock screen >
> Settings > Lock screen.
> Settings > Lock screen > Automatically lock.
> Settings > Lock screen.
135
Fingerprint.