Owner Information; Encryption; Make Passwords Visible - Kyocera Hydro EDGE User Manual

2. Select the Vibrate on touch check box.

Owner Information

Display the text on the lock screen.
1. Touch Home
2. Type text to display on the lock screen. The text will be displayed on the lock screen
when the Show owner info on lock screen check box is selected except when any
battery information is displayed at the same area.

Encryption

You can encrypt your phone and the SD card installed in your phone. For both encryption and
decryption, you need to enter a PIN or password for the screen lock. To set up a PIN or
password, see Screen
Once the encryption is performed, it cannot be undone. The process to remove
Warning:
the encryption will be a factory data reset for the phone and a formatting for the
SD card, which will delete all the data on the phone and the SD card.
Warning: Refrain from using the phone, including removing the battery and the SD card,
during the encryption process as some or all of your data will be lost if the
encryption process is interrupted.
1. Charge the battery first.
2. With your phone connected to the power source, touch Home
System settings > Security > Encrypt data.
3. Select the target to be encrypted from Phone & SD card, Phone, or SD card.
4. Read the message and touch Next.
5. Enter a PIN or password and touch Next.
6. Read the message and touch Encrypt.

Make Passwords Visible

You can hide your password or PIN number as you type it.
1. Touch Home
2. Clear the Make passwords visible check box.
Settings
> Menu > System settings > Security > Owner info.
Lock.
> Menu > System settings > Security.
156
> Menu >