Running View System Information (Inspect); Running Compaq Diagnostics; Boot Sequencing - Compaq Armada 3500 series Service Manual

2.5.3 Running View System Information (INSPECT)

The View System Information (INSPECT) utility provides information about the
computer and installed or connected devices. You can display, print, or save the
information.
In order to access the INSPECT utility, follow the instructions below:
1. Connect a printer if you want to print the INSPECT information.
2. Turn on or restart the computer.
3. Access Compaq Utilities by pressing F10 when the cursor blinks in the upper-right
corner of the display.
4. If prompted, select a language.
5. Click View System Information (INSPECT).
6. Click the item you want to view. The list includes the following:
System
ROM
Keyboard
System ports
System storage
Graphics
Memory
7. Follow the instructions on the screen to cycle through the screens, to return to the
list and choose another item, or to print the information.
8. Select Exit Inspect.

2.5.4 Running Compaq Diagnostics

Compaq Diagnostics provides computer component information when the operating
system is working.
If you are running Windows 95, access Compaq Diagnostics for Windows by
double-clicking My Computer ⇒ Control Panel ⇒ Compaq Diagnostics.

2.5.5 Boot Sequencing

1. Run Computer Setup.
2. Click the System Features icon ⇒ Boot Management box ⇒ MultiBoot tab.
3. Designate the hard drive boot (startup) sequence you want.
4. Click OK to accept the changes.
2-16 Troubleshooting
Audio
Operating system
System files
Windows files
Miscellaneous
Network (applicable only if
computer is docked in the
Convenience Base II)