Compaq Armada 3500 series Service Manual page 29

2.5.2.2 Computer Checkup (TEST) Error Codes
Computer Checkup (TEST) error codes occur if the system recognizes a problem while
running Computer Checkup. These error codes help identify possible defective
assemblies. Table 2-4 through Table 2-14 list Computer Checkup error codes, a
description of the error condition, and the recommended action for resolving the
condition. For removal and replacement procedures, refer to Chapter 5.
IMPORTANT: Run Computer Checkup each time you complete a recommended action
step. If the problem is resolved when POST and Computer Checkup are rerun (i.e.,
with no error codes), do not perform the remaining recommended action steps.
NOTE: The error codes in the following tables are listed in an "AYE-XX" format,
where:
Error Code Description
101-xx CPU test failed.
103-xx DMA page registers test failed.
104-xx Interrupt controller master test failed.
105-xx Port 61 error.
106-xx Keyboard controller self-test failed.
107-xx CMOS RAM test failed.
108-xx CMOS interrupt test failed.
109-xx CMOS clock test failed.
110-xx Programmable timer load data test failed.
113-xx Protected mode test failed.
2-10 Troubleshooting
A or AA = Number that represents the faulty assembly
YY = Test or action that failed
XX = Specific problem
Processor Test Error Codes
Table 2-4
Recommended Action
Replace the processor board and retest.
Replace the system board and retest.