Chapter 8: Troubleshooting WLAN
Chapter 8: Troubleshooting Layer 2 and Layer 3 issues
About this task
Perform the following procedure to troubleshoot Layer 2 and 3 issues.
Procedure
1. Log into the controller.
2. Press CTRL + Y on the keyboard to enter the console menu.
3. Select IP Configuration/Setup from the console menu to check the controller IP
4. Press CTRL + R to return to the console menu.
5. Select SNMP Configuration from the console menu to check the controller SNMP
6. Press CTRL + R to return to the console menu.
7. Select Switch Configuration from the console menu.
8. Use the options in this menu to track the various aspects of switch configuration.
9. Press CTRL + R to return to the console menu.
10. Select Spanning Tree Configuration from the console menu.
11. Use the options in this menu to track the various aspects of the spanning tree
12. Press CTRL + R to return to the console menu.
13. Select Command Line Interface from the menu.
14. Type the enable command to enter Privileged mode.
15. Use the command show ip to view the IP address configuration.
Avaya WLAN 8100 Troubleshooting Guide
operations
configuration.
configuration.
configuration.
August 2011
49