Configuring Ipfix Using Cli - Avaya WLAN 8100 Series Troubleshooting Manual

Disabling RMON statistics
About this task
Use this procedure to disable RMON statistics. If the variable is omitted, all entries in the table
are cleared.
Procedure
1. Enter Global Configuration mode.
2. Enter the no rmon stats [<1-65535>] command to disable RMON
Variable Definitions
<1-65535>

Configuring IPFIX using CLI

About this task
This section describes the commands used in the configuration and management of IP Flow
Information Export (IPFIX) using the CLI.
Navigation
• Configuring IPFIX collectors
• Enabling IPFIX globally
• Configuring unit specific IPFIX
• Enabling IPFIX on the interface
• Enabling IPFIX export through ports
• Deleting the IPFIX information for a port
• Viewing the IPFIX table
Configuring IPFIX collectors
About this task
The ip ipfix collector command is used to configure IPFIX collectors. IPFIX collectors
are used to collect and analyze data exported from an IPFIX compliant switch. In WLAN
Avaya WLAN 8100 Troubleshooting Guide
statistics.
Variable
on page 20
on page 22
Unique index for the statistics entry. If
omitted, all statistics are disabled.
on page 19
on page 20
on page 21
on page 21
on page 22
Configuring Serviceability
Definition
August 2011 19