2
Chapter 2 Front-Panel Operation
To Query the Firmware Revision
To Query the Firmware Revision
Perform the following procedure to query the 3499A/B/C firmware and
revision. For a description of the firmware and hardware revisions, see
"Firmware and Control Module Description" on page 59.
1. Press the Menu key. The CONFIG annunciator lights up and the
first level menu is shown.
CARD PAIR
2. Turn the knob to select "REVISION INFO".
REVISION INFO
3. Press Enter. The system firmware revision number will be displayed.
REVISION 4.0 2.0
4. Press Enter to return to the first level of the Menu menu.
REVISION INFO
5. Press Menu again to exit the Menu menu, the CONFIG annunciator
turns off.
52