Service; Door Seal Replacement; Basket Guide Removal; Figure 040-3: Seal Install Guide - Miele G 4205 Technical Information

Technical Information
4

Service

4.1

Door Seal Replacement

1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Open the door.
4. Remove the old seal.
5. Clean the groove around the cabinet.
Note:
Coating the seal with water may simplify installation.
6. Press the new seal in the groove; see Figure 040-3, Item 1. The seal lip
should point inwards.
7. Then press middle of the new seal into the groove under the locking
plate; see Figure 040-3, Item 2. At the same time, press the seal into the
corners.
8. Now press the remaining seal parts into the groove, working upward in
the direction of the arrows; see Figure 040-3, Item 3.

Figure 040-3: Seal Install Guide

4.2

Basket Guide Removal

1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Open the door.
4. Remove the top basket.
Warning!
The basket guide must not be levered off in the area of the bolts (see Figure
040-4). This could result in damage to the cabinet walls.
68
G 5xxx