Drying Plus Function; Normal" Program; Extra Quiet" Program (Mppw Only); Table 080-1: "Normal" Program - Miele G 4205 Technical Information

Technical Information
temperature is increased and additional rinse aid is dispensed.
3. High ambient temperature - Large load: The positive effects of a large
load on drying results are canceled out by the high ambient temperature.
The fan operating time remains unchanged, the final rinse temperature is
increased and the quantity of rinse aid dispensed remains unchanged.
4. Low ambient temperature - Small load: The positive effects of low
room temperature on drying results are canceled out by the small load.
The fan operating time remains unchanged, the final rinse temperature
is increased and the quantity of rinse aid dispensed is increased.
2.6

Drying Plus Function

See Section 020-2.4.
Note:
The customer can deactivate the Drying plus function in the Settings menu.
Drying plus is inoperative in the following programs:
 Rinse & Hold
 Express
Glassware cold

 Glassware warm
2.7

"Normal" Program

Individual results may vary from those shown below, depending on load and
soiling level.
Prewash
1. 2.
--
14'
--
8'

Table 080-1: "Normal" Program

1
Activate in programming mode under "2nd interim rinse".
2.8

"Extra Quiet" Program (MPPW Only)

For the "Extra Quiet" program, all program parameters are adjusted so that a
noise level of 38dB is never exceeded. In the main wash step, for example, 6
soak cycles are included. In addition, circulation pump speed is reduced so
that noise reduction can be fully optimized. As a result, program duration is
increased to over 4 hours.
Main wash
3.
1'15", DOS, 120°F,
20'
-- 1'15", DOS, 140°F,
34'
1'15", DOS, 131°F,
34'
120
Interim Rinse
rinse
1
1. 2.
1'15", 95°F,
DOS, 145°F,
30"
5' --
1'15", 95°F,
DOS, 154°F,
SensorDry 7'
G 5xxx
Drying
5' drain, 25'
fan
5' drain, 25'
fan
SensorDry