Door Springs; Summary; Standard Door Springs By Appliance Model; Electrical And Plumbing Connections - Miele G 4205 Technical Information

Technical Information
2

Door Springs

2.1

Summary

Springs are always installed in pairs of the same tensile strength.
Color
Orange
Uncolored
Green

Table C-6: Door Springs Summary

2.2

Standard Door Springs by Appliance Model

Model
G 45x0
G 42x0
G 42x5, G 5xx5
G 5xx0

Table C-7: Standard Door Springs by Model

3

Electrical and Plumbing Connections

3.1

Electrical Information

The appliance is equipped with a 4-foot power cord and molded NEMA 515
plug for connection to a NEMA 5-15R receptacle (120VAC, 15-amp, 3-prong,
grounded outlet).
It is recommended that the power outlet for the appliance be installed on the
wall (within the cabinets), adjacent to under-counter space where the
appliance is installed.
Ensure that the cabinets contain no rough edges that could damage the
power cord or drain hose. If metal cabinets are used, ensure that a rubber
grommet is installed around the opening.
Always exercise caution when sliding the dishwasher in or out, to prevent
damaging the power cord and/or hoses.
3.2

Hard-Wired Electrical Connection

Connect L1 (black) to L on the terminal block, N (white) to N on the terminal
block, and GND to the ground connector.
Note:
Hardwiring the dishwasher should only be done if required by electrical code.
Tensile strength (lbs (N))
Approx. 52 (230)
Approx. 72 (320)
Approx. 92 (410)
Width Spring color
18" Orange
24" Uncolored
24" Green
24" Uncolored
18
Length (in. (mm))
5.90 (150)
6.14 (156)
6.10 (155)
Max. front panel
weight [lbs (kg)]
15.4 (7)
20.9 (9.5)
28.6 (13)
20.9 (9.5)
G 5xxx