Figure 4.12 Display Results
Admin Status
Oper Status
UNI version
ILMI VCC
Signaling VCC
Signaling Time Resolution : 100
Speed
Type
Fiber mode
Fast link recovery state
ILMI synchronization mode : Enable
ATM Port Physical Submenu [2,1,6]
The ATM Port Physical submenu allows you to set the ATM Port Speed (either
OC-12c or OC-3c)[1], the framing protocol SONET/SDH, fast link recovery state
and ILMI synchroniztion mode.
Figure 4.13 ATM Port Physical Submenu
ATM Port Physical Menu
======================
[1] speed
[2] type
[3] fast
[4] sync
VCC Submenu [2,2]
The VCC submenu enables you to see ATM VCC attributes and display statistics
and settings. See Figure 4.14.
Avaya M770 M-ACCF/SF ATM Access Modules User's Guide
Chapter 4
: Up
: Up
: 3.1
: 0/16
: 0/5
: OC-12
: SONET
: MULTI
: On
- Change port speed OC-3/OC-12c
- Change port physical type SONET/SDH
- Change fast link recovery state
- Change ILMI synchronization mode
X-Switch CLI & ATM Terminal Interface
67