Port Submenu [2,1] - Avaya M-ACCF/SF User Manual

Chapter 4 X-Switch CLI & ATM Terminal Interface
Note: Ensure that the ATM access module and the ATM Switch to which it is
connected are set up to use the same signalling and SONET/SDH standards. The
two devices should also use the same ILMI VCC, signaling VCC, and UNI version.
If the devices do not use the same standards, they cannot communicate with each
other.

Port Submenu [2,1]

The Port submenu enables port attributes display, statistics, and settings. See Figure
4.11.
Figure 4.11
ATM Port Menu
=============
[1] display
[2] statistics
[3] uni
[4] address
[5] sigTimeRes
[6] physical
Table 4.4 below explains the operational meaning of each of the submenu items
above.
Table 4.4
Port Submenu
Item
[1] display
[2] statistics
[3] uni
[4] address
[5] sigTimeRes
[6] physical
66
Port Submenu
- Display port attributes
- Display port statistics
- Change UNI version 3.0/3.1
- Display local ATM addresses
- Change Signalling Time Resolution
- Administer ATM port physical parameters ->
Operational Meanings of Port Submenu Items
Operational Meaning
Shows the current ATM port attributes. See Figure 4.12.
Displays ATM port cell traffic statistics. See Monitoring
the ATM Access Module76
Allows you to set the system to network interface
version 3.0 or 3.1
Displays the local ATM addresses
Changes the Signalling time resolution
See ATM Port Physical Submenu below.
Avaya M770 M-ACCF/SF ATM Access Modules User's Guide