Input Presets - Extron electronics DSC 301 HD User Manual

Setting
Horizontal and Vertical Start
Active Pixels
Active Lines
Total Pixels
Phase
Brightness and Contrast
Color and Tint
Detail
Input Type
Audio Input Gain and
Attenuation
Image Size and Position
Preset Name
Film Mode
Presets Available
Recall Location

Input presets

An input preset is a user-defined set of input and picture control settings that can be
saved for each source within a system so that they can be recalled whenever the source
is applied (see
that was applied when the preset was initially saved.
This type of preset saves specific settings for size, centering, contrast, brightness, color
and tint (if applicable), detail, and input configuration.
An input preset can be recalled on any input supporting the input type that
NOTE:
was active when the preset was saved.
To save an input preset:
1. From the Input Presets list, (
2. Click the Save Preset button (
information on it, the Presets dialog box opens. Click the Overwrite button to
erase the previous data and save the new settings. Click the Cancel button to return
to the Image Settings page (see
To rename a preset:
1. In the
Input Preset Name
2. Change the name as desired.
3. Press the < Enter > key to save the new name.
To recall an input preset:
1.
From the
2. Click the Recall Preset button (
3. Click the Recall button to recall the preset. Click the Cancel button to return to the
Image Settings
Settings Included Within Presets
Input Preset
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
128 global
Any input supporting input
type saved in preset
figure 46, on the previous page). Input presets are unique to the signal
1
)select the desired preset.
1
). If the selected preset already has stored
2
figure 42
column, double-click an Input Preset Name .
list, select the desired preset.
Input Presets
3
page.
DSC 301 HD • Product Configuration Software
User Preset
----
----
----
----
----
Yes
Yes
Yes
----
----
Yes
Yes
----
3 per input channel 32 per input channel
Current input Automatically recalled
based on incoming signal
on page 54).
). The dialog box opens.
Presets
Auto Memory
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
----
----
Yes
----
----
56