User Presets; Input Presets - Extron electronics DSC 3G-HD A User Manual

User Presets

Three memory slots are available for you to store certain input settings as a preset. You
can then recall a saved preset and apply it to the current input.
NOTE: A user preset can be saved at one input resolution, then recalled at another.
User presets can be saved, recalled, and cleared via the OSD (see
submenu
page 53). The following values are saved in a user preset:
• Contrast
• Brightness
• Detail
• Preset name
• Vertical start
NOTE: You can change the picture and image settings using the
submenu
the Presets commands
commands.

Input Presets

The DSC has 16 memory slots in which you can save input presets that are global to the
HDMI or SDI input. These presets allow a matrix switcher with multiple types of video
inputs (such as an SMX) to be placed upstream from the DSC to expand the number of
video sources. Input presets can be saved and recalled only through SIS commands (see
the Input Presets commands
Values for the following settings are saved in input presets:
• Contrast
• Brightness
• Detail
• Film Mode
• Audio gain and attenuation
• Horizontal start
• Vertical start
Saving a preset when using a matrix switcher
When using the DSC with a matrix switcher, do the following to save a preset:
1. Switch each input of the matrix to the DSC.
2. Configure each input: size, position, detail, brightness, and contrast. (The remaining
settings — H start, V start, active pixels and lines, and total pixels — are not
user-configurable, but are stored automatically as part of the preset.)
3.
Save the settings to a preset for recall by the control system when that matrix input is
routed to the HDMI or SDI input.
on page 19) or SIS commands (see the
• Active lines (V Active)
• Horizontal image position
• Vertical image position
• Horizontal image size (width)
• Vertical image size (height)
(see page 22) and Input submenu
on page 53. The preset name can be assigned only via SIS
on page 54).
• Active pixels (H Active)
• Active lines (V Active)
• Horizontal image position
• Vertical image position
• Horizontal image size (width)
• Vertical image size (height)
• Total pixels
• Preset name
DSC 3G-HD A and DSC HD-3G A • Operation
User Presets
User Presets commands
Picture Controls
(see page 23) or SIS commands (see
on
39