Samsung AM160FNBDEH Installation Manual page 55

Setting an indoor unit address and installation option
Setting an indoor unit installation option (suitable for the condition of each installation location)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel(display) should be connected to an indoor unit to receive option.
3. Set the installation option according to the installation condition of an air conditioner.
- The default setting of an indoor unit installation option is "020000-100000-200010-300000
- Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when there is
more than one indoor unit.
4. Set the indoor unit option by wireless remote controller.
■ 02 series installation option
SEG1 SEG2
0 2
SEG7 SEG8
1 -
SEG13 SEG14
2 External control
SEG19 SEG20
3 -
If you input a number other than 0~4 of the individual control of the indoor unit(SEG20), the indoor is set as "indoor 1".
SEG5 option for centralized control usage is set to 0(disuse) as a default setting. You must adjust the setting for this option
separately when centralized control needs to be used.
■ 02 series installation option(Detailed)
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2
Explanation PAGE MODE
Remote
Controller
Display
Indication Details Indication Details Indication
Indication
and Details 0 2
54
SEG3 SEG4
- -
SEG9 SEG10
- -
SEG15 SEG16
External control
-
output
SEG21 SEG22
EEV opening of
an indoor unit
Heating setting
stopped during oil
compensation
return or Defrost
operation.
SEG3
Use of external
Use of robot cleaning
temperature sensor
Details Indication Details Indication
0 Disuse 0
SEG5
Central control
SEG11
Opening the
electronic
expansion valve
SEG17
-
SEG23
-
SEG4 SEG5
Use of central
control
Details
Disuse 0 Disuse
1 Use
SEG6
-
SEG12
-
SEG18
-
SEG24
-
SEG6
FAN RPM
compensation
Indication Details
0 Disuse