Volume Board - HP Spectre x360 Maintenance And Service Manual

Volume board

Volume board and cable spare part kits include replacement rubber feet.
Description
Volume board
Volume board cable
IMPORTANT:
board cable routes under the right speaker.
Before removing the volume board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the right speaker (see
Remove the volume board:
1. Remove the Phillips PM2.0×3.5 screw (1) that secures the volume board to the computer.
2. Lift and rotate the board so you can access the connector underneath (2).
3. Disconnect the cable from the ZIF connector on the bottom of the board (3).
You must remove the battery and right speaker to remove the volume board. The volume
Bottom cover on page
Battery on page
Speakers on page
22).
23).
33).
Spare part number
913634-001
913633-001
Volume board 43