Picture Control Adjustment; Adjusting The Picture Preference; Selecting The Color Temperature; Sound Control Adjustment - Toshiba SD-P4000 Service Manual

TV operation

Picture control adjustment/

Adjusting the picture preference

Picture controls are factory preset but you can adjust them individually as follows:
And also you can select four picture modes—Standard, Sports, Movie, and
Memory—as described in the following table:
Picture control adjustment
1 Press MENU, then press or to select
option.
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
2 Press or to select "PICTURE", then press
.
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/ / / MENU
3
Press or to select the item you want to
adjust, then press or to adjust the setting.
BRIGHTNESS 0
CONTRAST +32
COLOR 0
TINT 0
SHARPNESS 0
/ / / / CANCEL / MENU
Selection Pressing
BRIGHTNESS darker lighter
CONTRAST lower higher
COLOR paler deeper
TINT reddish greenish
SHARPNESS softer sharper
Note:
The CONTRAST default setting is set to maximum
(+32) at the factory.
4
After your desired setting press MENU
repeatedly until the menu screen is cleared.
To return all adjustments to the factory preset levels
Press CANCEL while making picture adjustments.
28
TV operation

Sound control adjustment/

Stereo and Second Audio Program (SAP)

Sound controls are factory preset but you can adjust them individually as follows:
The TV/DVD is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs
with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmis-
sion or for other purposes.
Sound control adjustment
1 Press MENU, then press or to select
option.
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
2 Press or to select "AUDIO", then press
.
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
3 Press or to select the item you want to
adjust, then press or to adjust the setting.
BASS 0
TREBLE 0
BALANCE 0
SURROUND OFF
BASS:
Press or to adjust the bass sound.
TREBLE:
Press or to adjust the treble sound.
BALANCE:
Press or to obtain an equal sound level from
both speakers.
SURROUND:
Press or to select "ON" or "OFF".
ON: The dynamic presence and sound created offers
a thoroughly enjoyable listening experience.
OFF: Normal sound.
4
After your desired setting press MENU
repeatedly until the menu screen is cleared.
To return BASS/TREBLE/BALANCE control
adjustments to the factory preset levels
Press CANCEL while making sound adjustments.
30
MENU
CANCEL
/ / /
ENTER
Adjusting the picture preference
1 Press MENU, then press or to select
option.
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/ / / / MENU
2 Press or to select "PICTURE
PREFERENCE", then press .
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/ / / MENU
3 Press or to select the desired picture
mode, then press ENTER.
PICTURE PREFERENCE
STANDARD
SPORTS
MOVIE
MEMORY
/ / ENTER / MENU
Mode Picture quality
STANDARD Standard picture quality (factory-set)
SPORTS Bright and dynamic picture (factory-set)
MOVIE Movie-like picture setting (factory-set)
MEMORY Your personal preferences (set by you;
see "Picture control adjustment" as left)
4 After your desired setting press MENU
repeatedly until the menu screen is cleared.
Note:
You cannot select "PICTURE PREFERENCE" in the Game
mode.
MENU
AUDIO
CANCEL
/ / /
Listening to stereo sound
When the TV is turned on or a channel selection is
made, make certain the "STEREO" appears on the
screen. This means that Stereo broadcasting is avail-
able. You can enjoy stereo sound from the left and
right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO to change
to mono sound. The noise should be eliminated. Press
it again to return to the stereo sound.
STEREO CH 013
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, make certain the SAP appears on the screen.
This means that the Second Audio Program
broadcasting is available.
STEREO SAP CH 013
To select desired sound
Press AUDIO to select the desired sound.
SEL. STEREO
MONO + SAP BROADCASTING
MONO SOUND
SAP SOUND
(MAIN)
STEREO+SAP BROADCASTING
STEREO SOUND
SAP SOUND
(MAIN)
MONO SOUND
(MAIN)

Selecting the color temperature

Selecting the color temperature
1 Press MENU, then press or to select
option.
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/ / / / MENU
2 Press or to select "COLOR
TEMPERATURE", then press .
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/ / / MENU
3 Press or to select the desired color
mode, then press ENTER.
COLOR TEMPERATURE
COOL
MEDIUM
WARM
/ /ENTER/MENU
Mode Picture quality
COOL Bluish
MEDIUM Neutral
WARM Reddish
4 After your desired setting press MENU
repeatedly until the menu screen is cleared.
Basic playback

Playing a disc

This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc slot as it is closing.
Neglecting to do so may cause serious personal injury.
DVD
Basic playback
VCD
CD
Preparations:
• When connecting to other equipment, turn the power off.
1
Press POWER on the unit or on the remote control
to turn on the unit.
The Power indicator will light.
• Every time you press POWER, the TV/DVD starts from
TV mode.
• When using an amplifier, switch on the amplifier.
2 Press TV/DVD on the remote control to select DVD
mode.
The DVD startup screen will appear on the screen.
"Reading" display will change to "No Disc". (If DVD
disc has already loaded,
No Disc
playback will start
automatically.)
Load the disc in the disc slot.
3
Load the disc in the disc slot with the label side facing
forward. (If the disc has a label.) Hold the disc without
touching either of its surfaces, align it with the guides,
and place it in position.
Note:
When you playback the 8cm disc, you need an adapter
(not supplied).
MENU
/ / /
ENTER
POWER VOLUME PLAY STOP EJECT
+ /–
4
On the TV-screen, "No Disc" changes to "Reading" and
then playback commences.
No Disc
Reading
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press / or / to select title, then press
ENTER. Title is selected and play commences.
Press VOLUME + or – to adjust the volume.
5
VOLUME 32
6 Press STOP to end playback.
Resuming facility
• The unit records the stopped
point, depending on the disc. "
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or un-
load the disc (" " appears on the
screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the player's operation. Disconnect
the AC power cord once, then connect it again.
29
"
31