Closed Captions; Setting The V-Chip - Toshiba SD-P4000 Service Manual

14-inch lcd tv/dvd combination
Hide thumbs Also See for SD-P4000:
Table of Contents

Advertisement

TV operation
TV operation (continued)
TV operation
CHANNEL UP/DOWN
Press and release CH + or –. The channel automati-
cally stops at the next channel set into memory.
For proper operation, before selecting channels, they
should be set into the memory. See page 22 "To
memorize channels".
RECALL
Press RECALL to display the current informations on the
screen. Press RECALL again to clear the display.
• Channel number or external input mode
• Stereo or SAP (Second Audio Program) audio status
• Audio output status
STEREO SAP
CH 012
SEL. STEREO
CH RETURN
This button allows you to go back to the last channel
selected by pressing CH RTN. Press CH RTN again to
return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV/DVD's
sound will be silenced and "MUTE" will appear briefly on
the screen. The sound can be switched back on by
pressing this button again or one of VOL +/–.
MUTE
24
TV operation

Setting the V-Chip

An age limitation can be set to forbid children to see and hear violent scenes or
pictures for adults, etc. The TV/DVD corresponds to "TV RATING" and "MOVIE
RATING". To use the V-Chip function, you must register a password.
Notes:
• If you forget the password, you cannot set the V-Chip.
• To avoid forgetting the password, write it down and keep in
the safe place.
To register password
1
Press MENU, then press
or
to select
option.
V-CHIP SET
NEW
PASSWORD
: – – – –
/
/
/
/ MENU
2
Press
or
to select "PASSWORD".
V-CHIP SET
NEW
PASSWORD
:
– – – –
0–9/ENTER/CANCEL/MENU
3
Enter the password (4 digits) using Number
buttons (0–9), then press ENTER.
• If you input a wrong number, press CANCEL.
V-CHIP SET
NEW
PASSWORD
:
0–9/ENTER/CANCEL/MENU
" " appears instead of the number.
4
Enter the same password again for the safety,
then press ENTER.
Now the password was registered and V-Chip
setting menu will appear on the display.
V-CHIP SET
CONFIRM
PASSWORD
:
0–9/ENTER/CANCEL/MENU
26
RECALL
GAME
VOL +/–
SLEEP
MUTE
CH RTN
CH +/–
SLEEP
To set the TV/DVD to turn off after a preset amount of
time, press SLEEP on the remote control. The clock
will count down 10 minutes for each press of SLEEP
(120, 110, ...10, 0). After the sleep time is programmed,
the display will appear briefly every ten minutes to
remind you that the sleep timer is operating. To confirm
the sleep timer setting, press SLEEP and the remain-
ing time will be displayed for a few seconds. To cancel
the sleep timer, press SLEEP repeatedly until the
display turns to 0.
SLEEP
120
GAME MODE
After connecting a TV Game to the unit, press GAME.
The TV screen changes to the Game mode.
• The Game mode screen is adjusted to the suitable
brightness for your eyes.
• Game timer function: After one hour the Game timer
display will appear every 30 minutes for approx. 5
seconds showing how long the time has passed up
to 4 hours.
• If GAME is pressed during standby mode, the unit
turns on automatically and the Game mode screen
appears on the screen.
GAME
HEADPHONES
Insert a stereo headphones (not supplied) with a 1/8"
mini plug into the PHONES jack on the front panel. If
you connect headphones, the sound from TV speakers
is muted.
0–9
MENU
CANCEL
/ / /
ENTER
To change password
1
In the V-CHIP menu, press
or
to select
"CHANGE PASSWORD", then press
.
V-CHIP
OFF
V-CHIP SET
CHANGE PASSWORD
/
/
/ MENU
Enter the new password using Number buttons
2
(0–9), then press ENTER.
CHANGE PASSWORD
NEW
PASSWORD
:
– – – –
0-9/ENTER/CANCEL/MENU
Enter the same password again using Number
3
buttons (0–9) for safety, then press ENTER.
CHANGE PASSWORD
CONFIRM
PASSWORD
:
0-9/ENTER/CANCEL/MENU
4
Press MENU repeatedly until the menu screen
is cleared.
Note:
The V-Chip feature is available only for the U.S. V-Chip system.
The Canadian V-Chip system is not supported.

Closed captions

WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display closed captioned
television programs. Closed captioning will display text on the screen for
hearing impaired viewers or it will translate and display text in another
language.
Closed captions
Captions: This closed caption mode will display text on the screen in English or another language (depending
on the setting of the closed captions CH 1/2).
Generally, closed captions in English are transmitted on captions channel 1 and closed captions in other lan-
guages are transmitted on captions channel 2.
Text: The text closed caption mode will usually fill the screen with a programming schedule or other information.
After selecting a closed caption mode, it will stay in effect until it is changed, even if the channel is changed.
If the captions signal is lost due to a commercial or a break in the signal, the captions will reappear when the
signal is received again. If the channels are changed, the captions will be delayed approximately 10 seconds.
The captions will appear in places on the screen where they will least interfere with the picture, usually on the
bottom of the screen. News programs will usually show three-line closed captions which scroll onto the screen.
Most other shows provide two or three lined captions placed near the character who is speaking so the viewer
can follow the dialogue. Words in italics or underlined describe titles, words in foreign languages or words
requiring emphasis. Words that are sung usually appear enclosed by musical notes.
For television programs broadcasting with closed captions, look in your TV guide for the closed captions symbol
(CC).
TO VIEW CLOSED CAPTIONS
Press CLOSED CAPTION to switch between normal TV and the two closed
caption modes (captions and full screen text). Closed captioning will display text
on the screen for hearing impaired viewers.
Notes:
• When selecting closed captions, the captioning will be delayed approximately 10 seconds.
• If no caption signal is received, no captions will appear, but the television will remain in the caption mode.
• Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning,
especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not
allow time for editing.
• When captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with closed
captions.
• Some cable systems and copy protection systems may interfere with the closed captioned signal.
• If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
To set the V-Chip
1
In the V-CHIP menu, press
or
to select
"V-CHIP SET", then press
.
V-CHIP
OFF
V-CHIP SET
CHANGE PASSWORD
/
/
/ MENU
2
Press
or
to select "TV RATING", then
press
or
to display the desired setting.
After setting, press ENTER.
OFF
: TV RATING is not set
TV-Y : All children
TV-Y7 : 7 years old and above
TV-G : General audience
TV-PG : Parental guidance
TV-14 : 14 years old and above
TV-MA: 17 years old and above
When you select TV-
Y7, TV-PG, TV-14 or
TV-MA, press
V-CHIP SET
TV RATING
TV-Y
RECALL to show the
MOVIE RATING
OFF
contained rating.
Press
/
or
/
to select the desired
/
/
/
/ ENTER/MENU
item you want.
3
Press
or
to select "MOVIE RATING".
V-CHIP SET
TV RATING
TV-Y
MOVIE RATING
OFF
/
/
/
/ ENTER/MENU
CLOSED
CAPTION
RECALL
MENU
/ / /
ENTER
4
Press
or
to select desired rating.
After setting, press ENTER.
V-CHIP SET
TV-Y
TV RATING
MOVIE RATING
PG-13
/
/
/
/ ENTER/MENU
OFF
: MOVIE RATING is not set
G
: All ages
PG
: Parental guidance
PG-13 : Parental guidance
less than 13 years old
R
: Under 17 years old
Parental guidance suggested
NC-17 : 17 years old and above
X
: Adult only
5
Press
or
to select "V-CHIP".
V-CHIP
OFF
V-CHIP SET
CHANGE PASSWORD
/
/
/
/ MENU
6
Press
or
to display "ON".
Now your settings were set into the memory.
V-CHIP
ON
V-CHIP SET
CHANGE PASSWORD
/
/
/
/ MENU
7
Press MENU repeatedly until the menu screen is
cleared.
To use after the TV is protected
When the program applied to the V-Chip setting is received,
enter the password, then press ENTER. Protection can be
canceled.
Note:
The V-Chip function is activated only on programs that have
the rating signal.
25
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents