Dell 1800FP User Manual page 22

ositioning moves the viewing area around on the display screen.
hen making changes to either the 'Horizontal' or 'Vertical'
he Clock and Phase adjustments allow you to more closely
just your display to your preference. These settings are
cessed through the main OSD menu, by selecting 'Tracking'.
satisfactory results are not obtained using the Phase adjustment,
e the Clock adjustment and then use Phase again.
Note: This function may change the width of the
display image. Use the Horizontal function of the
Position menu to center the display image on the
screen.
Vertical Position:
Adjust the vertical position of the display.
moves the screen down
moves the screen up
Clock:
This function only applies to D-sub inpu
sub signal inputs into the display, it will b
to a digital signal through a signal sampl
It is rare , although possible, that th
interval is not automatically optimized. I
you might see abnormal image displa
screen. You can adjust the sampli
manually through Pixel Clock function.
decrease the sampling interval
increase the sampling interval
Phase:
Just like Pixel Clock function, you can als
sampling phase.
decrease phase shift of sampling signa
increase phase shift of sampling signal
Language:
To choose the language in which the control n
displayed.
Image Size:
This function displays the image in its original
enlarged size so as to fit in the full screen of th
panel.
OSD Position:
To adjust position of the OSD window on the s
Signal:
To select DSUB ANALOG, DVI DIGITAL
ANALOG / as the active input. This featur
when two computers are connected to the
The display automatically detects the pro
when only one video source is connected