Dell 1800FP User Manual page 19

E. Select/Auto button
F. Power button and LED indicator
On Screen Display (OSD) Menu System
Direct-Access Functions
Function
Auto adjustment:
Automatically adjust vertical position, horizontal position, pixel clock and phase. For
best results, use this button when there is a full screen of detailed information, such
as fine text, or the shutdown window (without shutting down the system). The
following dialog will appear on a black screen as the display self-adjusts to the
current input:
See Auto adjustment.
Note: Auto Adjust will not occur if you press the button while there are no
active video input signals, or attached cables.
Turn the display on/off and indicate the status of power management. The power
indicator lights steady green while the display function normally. The LED is steady
amber for DPMS. See Power management mode.
Adjustment Method
Even though your computer system can recognize your new flat panel display
on startup, the 'Auto Adjustment' function will optimize the display settings for
use with your particular setup. Auto Adjustment can be accessed through the
OSD via the Image Settings submenu pictured at left or, you may use the direct
access instructions below:
1.Turn on your computer and display.
2.Push the 'Select/Auto' button (E) to activate the Auto adjustment function.
3.When finished, the pixel clock and phase should be adjusted to their optimal
settings.