IBM R30 Operator's Manual page 259

Three-button mouse being identified or configured.
925
5083 tablet being identified or configured.
926
5083 tablet being identified or configured.
927
Standard speaker being identified or configured.
928
Dials being identified or configured.
929
Lighted program function keys (LPFK) being identified or configured.
930
IP router being identified or configured.
931
Async planar being identified or configured.
933
Async expansion drawer being identified or configured.
934
3.5-inch diskette drive being identified or configured.
935
5.25-inch diskette drive being identified or configured.
936
An HIPPI adapter is being configured.
937
POWER GXT 100 graphics adapter being identified or configured.
942
Progress indicator. 3480 and 3490 control units attached to a System/370
943
Channel Emulator/A adapter are being identified or configured.
1.0GB SCSI differential disk drive being identified or configured.
945
Serial port 3 adapter is being identified or configured.
946
Progress indicator. A 730MB SCSI disk drive is being configured.
947
Portable disk drive being identified or configured.
948
Unknown direct bus-attach device being identified or configured.
949
Missing SCSI device being identified or configured.
950
670MB SCSI disk drive being identified or configured.
951
355MB SCSI disk drive being identified or configured.
952
320MB SCSI disk drive being identified or configured.
953
400MB SCSI disk drive being identified or configured.
954
857MB SCSI disk drive being identified or configured.
955
670MB SCSI disk drive electronics card being identified or configured.
956
120MB DBA disk drive being identified or configured.
957
160 MB DBA disk drive being identified or configured.
958
160MB SCSI disk drive being identified or configured.
959
1.37GB SCSI disk drive being identified or configured.
960
1.0GB SCSI disk drive being identified or configured.
968
Half-inch, 9-track tape drive being identified or configured.
970
150MB 1/4-inch tape drive being identified or configured.
971
2.3GB 8 mm SCSI tape drive being identified or configured.
972
Other SCSI tape drive being identified or configured.
973
CD-ROM drive being identified or configured.
974
Progress indicator. An optical disk drive is being identified or configured.
975
M-Audio Capture and Playback Adapter being identified or configured.
977
540MB SCSI-2 single-ended disk drive being identified or configured.
981
M-Video Capture Adapter being identified or configured.
985
2.4GB SCSI disk drive being identified or configured.
986
Progress indicator. Enhanced SCSI CD-ROM drive is being identified or
987
configured.
200MB SCSI disk drive being identified or configured.
989
2.0GB SCSI-2 single-ended disk drive being identified or configured.
990
525MB 1/4-inch cartridge tape drive being identified or configured.
991
5GB 8 mm tape drive being identified or configured.
994
1.2GB 1/4 inch cartridge tape drive being identified or configured.
995
Progress indicator. Single-port, multi-protocol communications adapter is
996
being identified or configured.
FDDI adapter being identified or configured.
997
2.0GB4 mm tape drive being identified or configured.
998
7137 or 3514 Disk Array Subsystem being configured.
999
Operator Panel Display Numbers
E-11