Configuration Program Indicators - IBM R30 Operator's Manual

312
313
314
315
318
319
322
323
324
325

Configuration Program Indicators

5c0
5c1
5c2
5c3
5c4
5c5
5c6
500
501
502
503
504
505
506
507
508
510
511
512
513
516
517
518
520
521
522
523
524
525
526
527
528
E-6
Operator Guide
Flash Utility ROM RAM POST memory configuration error or no memory
found (irrecoverable).
Flash Utility ROM RAM POST failure (irrecoverable).
Flash Utility ROM Power status register failed (irrecoverable).
Flash Utility ROM detected a low voltage condition.
Flash Utility ROM RAM POST is looking for good memory.
Flash Utility ROM RAM POST bit map is being generated.
CRC error on media Flash Image. No Flash Update performed.
Current Flash Image is being erased.
CRC error on new Flash Image after Update was performed. (Flash Image
is corrupted.)
Flash Update successful and complete.
Streams-based hardware drive being configured.
Streams-based X.25 protocol being configured.
Streams-based X.25 COMIO emulator driver being configured.
Streams-based X.25 TCP/IP interface driver being configured.
FCS adapter device driver being configured.
SCB network device driver for FCS is being configured.
AIX SNA channel being configured.
Querying Standard I/O slot.
Querying card in Slot 1.
Querying card in Slot 2.
Querying card in Slot 3.
Querying card in Slot 4.
Querying card in Slot 5.
Querying card in Slot 6.
Querying card in Slot 7.
Querying card in Slot 8.
Starting device configuration.
Device configuration completed.
Restoring device configuration files from media.
Restoring basic operating system installation files from media.
Contacting server during network boot.
Mounting client remote file system during network IPL.
Remote mount of the root and /usr file systems failed during network boot.
Bus configuration running.
/etc/init invoked cfgmgr with invalid options; /etc/init has been corrupted
or incorrectly modified (irrecoverable error).
The configuration manager has been invoked with conflicting options
(irrecoverable error).
The configuration manager is unable to access the ODM database
(irrecoverable error).
The configuration manager is unable to access the config. rules object in
the ODM database (irrecoverable error).
The configuration manager is unable to get data from a customized device
object in the ODM database (irrecoverable error).
The configuration manager is unable to get data from a customized device
driver object in the ODM database (irrecoverable error).
The configuration manager was invoked with the phase 1 flag; running
phase 1 at this point is not permitted (irrecoverable error).
The configuration manager cannot find sequence rule, or no program name
was specified in the ODM database (irrecoverable error).