Location Code Table For Scsi And Non-Scsi Devices - IBM R30 Operator's Manual

Location Code Table for SCSI and Non-SCSI Devices

Use the following table to determine the physical location of a device or unit.
Note: The location code format for 9333 devices is described on the previous page and in
9333 documentation.
Use the following example to identify these two-character pairs: AB-CD-EF-GH.
Pair
AB
CD
CD
EF
Value Description
Workstation-type system unit.
00
CPU drawer or enclosure in a rack-type system unit.
00
SCSI device drawer in a rack-type system unit.
00
SCSI disk drawer in a rack-type system unit.
00
This is not an invalid number. Slot 8 contains a standard SCSI
08
adapter.
CPU card.
00
A device attached to the I/O planar.
00
Adapter in slot 1 of the I/O planar.
01
Adapter in slot 2 of the I/O planar.
02
Adapter in slot 3 of the I/O planar.
03
Adapter in slot 4 of the I/O planar.
04
Adapter in slot 5 of the I/O planar.
05
Adapter in slot 6 of the I/O planar.
06
Adapter in slot 7 of the I/O planar.
07
Adapter in slot 8 of the I/O planar.
08
Second I/O planar.
10
Adapter in slot 1 of the second I/O planar
11
Adapter in slot 2 of the second I/O planar
12
Adapter in slot 3 of the second I/O planar
13
Adapter in slot 4 of the second I/O planar
14
Adapter in slot 5 of the second I/O planar
15
Adapter in slot 6 of the second I/O planar
16
Adapter in slot 7 of the second I/O planar
17
Adapter in slot 8 of the second I/O planar
18
Graphics adapter slot.
0J
Memory card in slot A on the system/CPU card.
0A
Memory card in slot B on the system/CPU card.
0B
Memory card in slot C on the system/CPU card.
0C
Memory card in slot D on the system/CPU card.
0D
CPU card located in slot P.
0P
CPU card located in slot Q.
0Q
CPU card located in slot R.
0R
CPU card located in slot S.
0S
Does not have a connector or software was not able to identify
00
the connector number.
The number of the connector on an adapter card, distribution box,
01
or planar. If needed, see Chapter 8 for the connector numbering
02
on your adapter.
03
04
Internal diskette connector on the standard I/O planar.
0D
Built-in Ethernet adapter.
0E
Parallel printer connector.
0P
4-19
AC Rack Description