American Dynamics ADCA7BWO7RP Instruction Manual page 21

 PRIVACY MASK – Enables (ON) or disables (OFF) the privacy mask option.
If the privacy mask is enabled (ON), press ENTER to advance to the ENABLE MASKS
submenu.
ENABLE MASKS (1 to 6)
Here the user can either enable (ON) or disable (OFF) any of Masks 1~6. For the other 6
masks (7~12), move the cursor to "NEXT." and press ENTER.
ENABLE MASKS (7 to 12)
Here the user can either enable (ON) or disable (OFF) any of Masks 7~12. For the other 6
masks (1~6), move the cursor to "PREV." and press ENTER.
To adjust the position and size of each privacy mask, move the cursor to any mask that is
enabled (ON) and press ENTER twice (only need to press ENTER once immediately after
enabling a particular mask). The privacy mask adjustment window will appear. All enabled
masks will be visible and adjustable in this window.
MASK for position adjustment
Initially the MASK for adjustment (currently selected mask) appears in white color. Shift the
OSD toggle switch or use directional buttons to adjust position of the mask. Then press
ENTER.
MASK for size adjustment
Then the MASK for adjustment would appear in blue color. Shift the OSD toggle switch or use
directional buttons to increase or decrease the horizontal (left/right) and/or vertical (up/down)
size of the mask. Then press ENTER.
The above MASK adjustment window (white for mask position adjustment, and blue for mask
size adjustment) will repeat for the next mask.
To exit this mask adjustment window and go back to the ENABLE MASKS submenu, press
and hold ENTER for at least 1 second.
 MASK COLOR – The available colors for privacy masks are RED, WHITE, and BLACK.
 ID DISPLAY – Enables (ON) or disables (OFF) ID display option.
OSD Menu Descriptions
User's Manual 3-7