Modifying The Mmsi Group Number List; (Group) - Raymarine RAY230E Owner's Handbook Manual

Operations
Deleting Shore Stations from the List
The oldest MMSI number and nickname registered flashes on the dot
matrix display. Press the SQ UP/DOWN key to display the registered
stations. To delete the contents indicated, press the ENT key and the
message DEL? Y is displayed. Press the ENT key to process the deletion
and exit the Menu operation. To exit without deleting, press the SQ UP/
DOWN key until DEL? N is displayed. Press the ENT key and operation
returns to the mode before the Menu operation began.
If the phonebook list has no stations entereed, the message PHNBOOK IS
EMPTY HOLD DOWN CLR KEY is displayed. Press and hold the CLR key
for 3 seconds to exit Menu mode.
3.5.30.3.4 Modifying the MMSI Group Number 3.5.30.3.4 Modifying the MMSI Group Number 3.5.30.3.4 Modifying the MMSI Group Number
3.5.30.3.4 Modifying the MMSI Group Number 3.5.30.3.4 Modifying the MMSI Group Number
( G R O U P ) ( G R O U P )
( G R O U P ) ( G R O U P ) ( G R O U P )
This operation modifies the MMSI number to be used in receiving a Group
Digital Selective Call.
1) As described in section 3.5.30.3 DSC Operation above, select the DSC
operation GROUP.
2) Press the ENT key to initiate the process. The 7-segment display shows
GrP and the dot matrix display shows ENTRY.
3) Use the SQ UP/DOWN key to alternate between ENTRY or DELETE.
4) Press the ENT key to turn to submit the desired selection.
ENT
ENT
ENT
3-59