Modifying The Mmsi Number List (Phnbook) - Raymarine RAY230E Owner's Handbook Manual

3-54
3.5.30.3.3 3.5.30.3.3 3.5.30.3.3
3.5.30.3.3 3.5.30.3.3
( P H N B O O K ) ( P H N B O O K ) ( P H N B O O K )
( P H N B O O K ) ( P H N B O O K )
This operation is used to modify the "phonebook" lists of MMSI numbers
used for DSC Individual Calls. Two lists are available: one for Ship stations
and one for Shore stations. Each list enables you to register a maximum of
20 stations. The list for the Ship station allows you to register the MMSI
number and nickname of the station, while the list for the Shore station
additionally enables you to register the telephone number for semi-
automatic ship-to-shore calling.
1) As described in section 3.5.30.3 DSC Operation above, select the DSC
operation PHNBOOK.
2) Press the ENT key to initiate the process. The 7-segment display shows
Phb and the dot matrix display shows SHIP.
3) Use the SQ UP/DOWN key to select between SHIP or SHORE.
4) Press the ENT key to turn to submit your selection.
Modifying the List of Ship Stations
In this operation, a ship is registered (added) to or deleted from the
phonebook list for ship stations.
1) When SHIP is displayed, press the ENT key. The 7-segment display
shows SHP, while on the dot matrix display shows ENTRY.
2) The ENTRY selection is used to register (add) an item to the list. Press
the ENT key to accept.
The list can hold a maximum of 20 entries. If a list is already full or if the
list becomes full during this process, operation returns to the EDIT
mode and the indicator PHNBOOK IS FULL is displayed.
Modifying the MMSI Number List Modifying the MMSI Number List Modifying the MMSI Number List
Modifying the MMSI Number List Modifying the MMSI Number List
ENT
Operations