Receiving A Group Call - Raymarine RAY230E Owner's Handbook Manual

Operations
If ENT is pressed, the alarm is turned off, and a new prompt appears on the
display, instructing you to press the PTT switch. Press PTT to transmit an
acknowledgement (ACK). If PTT is not pressed within 5 seconds of the
prompt appearing, the transmission is done automatically. Pressing the
PTT switch causes the channel to change to the communication channel.
If the CLR key is pressed, the alarm is turned off and the displays are
cleared and the received contents are stored in the Log File. The radio then
reverts to the operation mode before receiving the Individual Call. DSC
will continue flashing to indicate there is an unread call in the log.
If the CLR key is pressed

3.5.26.4 Receiving a Group Call

3.5.26.4 Receiving a Group Call
3.5.26.4 Receiving a Group Call 3.5.26.4 Receiving a Group Call 3.5.26.4 Receiving a Group Call
When a Group Call is received, the DSC indicator flashes, INd appears on
the 7-segment display, and the DSC Received Alert is sounded. On the dot
matrix display appears the message RECEIVED IND CALL, along with a
prompt to press ENT to accept or CLR to log the call. If the MMSI number
exists in the list, the associated name is displayed. If no match is found, the
actual numeric value of the MMSI is displayed.
Until either the ENT key or the CLR key are pressed, the prompt is flashed
at 1-second intervals and is accompanied by an alarm for up to 3 minutes.
If neither ENT nor CLR are pressed during these 3 minutes, the radio
reverts to the operation mode before receiving the Group Call. The DSC
indicator continues to be flashed on the LCD display until the contents of
the log files can be confirmed.
Receiving
Scrolls
ENT
Automatic transmission is
done if MMSI No. is displayed
but the No. is not listed
3-37
After no operation
for 5 seconds