Welcome To Your Cutter; Cutter Models; Documentation - HP 54 Basic Cutter User Manual

Welcome to your cutter

Your cutter is a drag-knife contour cutter designed to cut flexible substrates accurately. Some major features of
the cutter are shown below:
Optical Positioning System (OPOS X) and HP Barcode System for precise and unattended cutting
●
Different cutting modes, with the ability to cut completely through some substrates
●
Compatible with blade, pen, and pounce tools
●
High-speed cutting head, for reliable and effortless vinyl cutting
●
Intuitive control panel to modify settings easily
●
Intelligent substrate system to keep substrates on track, even when cutting at top speed
●
Ethernet (LAN) connectivity
●
Substrate basket included
●
To send print jobs to your printer, you will need Raster Image Processor (RIP) software, which should be run on a
separate computer. RIP software is available from various different companies. Included in the box is a license for
the HP FlexiPrint and Cut RIP, supporting Print and Cut and Direct Cut workflows.

Cutter models

Supplied with the cutter
Optional accessories
Consumables

Documentation

The following documents can be downloaded from http://www.hp.com/go/latex115printandcut/manuals/:
Introductory information
●
Site preparation guide
●
Assembly instructions
●
User guide
●
Legal information
●
Limited warranty
●
2 Chapter 1 Introduction
HP 54 Basic Cutter, HP Latex 54 Cutter, and HP Latex 64 Cutter
HP standard blades (2)
HP cut-off knife
HP 3-in substrate flanges
HP FlexiPrint and Cut RIP license
HP Latex Cutter Extended Kit
HP Latex 2-in Media Holder Kit
HP Latex Standard Blade Kit
HP Latex Specialty Blade Kit
HP Latex Standard Blade Kit
ENWW