Ip Telephone Features; Introduction; Accessing Ip Telephone Features - Avaya DEFINITY 4606 User Manual

IP Telephone Features

Introduction

This chapter contains procedures for using DEFINITY
Depending on how your 4606 IP Telephone was set up by your System
Administrator, you can access some or all of the features discussed in this chapter
using Line/Feature buttons or Feature Access Codes.
We cover feature access methods in the next section. Following that section, a
"Feature List" provides a reference to the procedures for activating and using
features, which are then listed in alphabetical order.
Check with your System Administrator for the configuration of your phone system.

Accessing IP Telephone Features

Your 4606 IP Telephone provides two ways to access IP Telephone features:
1. Your System Administrator may have programmed some of your
telephone's Line/Feature buttons to automatically access a feature when
pressed. In some cases, features activated via Line/Feature buttons have a
"steady green" indicator light to signify active status. When the feature is
deactivated (turned off), the indicator light goes off.
2. If you don't have a button administered on your phone for a specific
feature, you may be able to access a feature by entering a two or three
digit Feature Access code using the number pad. Note that the procedures
in this chapter often provide information about using access codes for
applicable features. Your System Administrator assigns access codes.
NOTE:
Note that because the DEFINITY 4606 IP Telephone has just six
line/feature buttons, button-activated features may be limited.
5
®
phone features.
Issue 1 July 2001
5-1