Lubrication Guide - Polaris Scrambler 1000 Owner's Manual

MAINTENANCE

Lubrication Guide

Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 96. Items not listed in
the chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item Recommended
Engine Oil PS-4 5W-50
4-Cycle Oil
Transmission AGL Gearcase
Oil Lubricant &
Transmission
Fluid
Demand Drive Demand Drive
Fluid (Front Fluid
Gearcase)
Rear ATV Angle Drive
Gearcase Oil Fluid (or GL5 80-
90 weight gear
lube)
Brake Fluid DOT 4 Brake
Fluid
Front Prop U-Joint Grease
Shaft Yoke
A-Arms, Front POLARIS All
and Rear Season Grease
Front Prop Shaft Yoke
100
Capacity
Lubricant at Fluid
Change
(1.9 l)
37 oz.
(1100 ml)
9.3 oz.
(275 ml)
7.1 oz.
(210 ml)
Grease fittings (3 pumps maximum) every 500 miles,
before long periods of storage, or after pressure
washing or submerging.
Grease fittings after extreme use or if suspension
becomes squeaky.
Fill Plug
Torque
2 qt. ---
10-14 ft. lbs.
(14-19 Nm)
8-10 ft. lbs.
(11-14 Nm)
10-14 ft. lbs.
(14-19 Nm)
--- ---
Drain Plug Inspection
Torque Procedure
12 ft. lbs. Page 101.
(16 Nm)
10-14 ft. lbs. Page 104.
(14-19 Nm)
11 ft. lbs. Page 105.
(15 Nm)
10-14 ft. lbs. Page 106.
(14-19 Nm)
--- Page 111.
Front