Lubrication Guide - Polaris Trail Boss 330 Owner's Manual

Lubrication Guide

Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 57. Items not listed in the
chart should be lubricated at the General Lubrication interval. See page
103 for the part numbers of POLARIS products.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item
Engine Oil
Brake Fluid
Drive Chain(s)
Transmission Oil
Swing Arm
Bushings
Axle Housing
Tie Rod Ends
Perform these procedures more often for vehicles subjected to severe use.
Lube
PS-4 PLUS Performance
Synthetic 2W-50
DOT 4 Only
O-ring chain lube or SAE
80/90
AGL PLUS Transmission
Fluid
Premium All Season
Grease
Premium All Season
Grease
Tie Rod Ends
MAINTENANCE
See page 62.
See page 31.
Lubricate.
See page 64.
Locate fittings on swing arm and
grease with grease gun
Lift boot, clean away dirt and grease,
apply fresh grease by hand and reas-
semble. Perform when suspension
action becomes stiff, or after washing.
Axle
Housing
Swing Arm
Bushings
Method
61