Table of Contents

Advertisement

EVGA Z370 FTW (134-KS-E377)

POST Codes

This section provides the AMI POST Codes for the
EVGA Z370 FTW Motherboard during system boot
up. The POST Codes are displayed on the Debug
LED readout located directly on the motherboard.
See Page 12 and 13, component 17 of the Component
Legend for physical location.
This Debug LED will switch to display current CPU temperatures after the
system has fully booted into the Operating System. Please note that if you see
the Debug LED constantly switching numbers after entering Windows, the
Debug LED is showing your CPU temperature, and is NOT reporting errors.
AMI POST Codes
1
Power on. Reset type detection (soft/hard).
2
AP initialization before microcode loading
3
North Bridge initialization before microcode loading
4
South Bridge initialization before microcode loading
5
OEM initialization before microcode loading
6
Microcode loading
7
AP initialization after microcode loading
8
North Bridge initialization after microcode loading
9
South Bridge initialization after microcode loading
0A
OEM initialization after microcode loading
0B
Cache initialization
0C-0D Reserved for future AMI SEC error codes
0E
Microcode not found
Debug LED with CPU
Temperature Monitor
- 126 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents