EVGA Z370 FTW User Manual page 91

EVGA Z370 FTW (134-KS-E377)
2. After the cards are installed, have power connected, and the SLI bridge attached,
boot into Windows. The graphics driver will normally identify the cards and
automatically configure the driver. If not, then you may need to reinstall the driver.
Once finished, you will receive a popup in the lower right corner stating that you have a
SLI capable setup and it needs to be configured. If you
did not see the message, then first verify that both cards
are detected and functioning without system errors from
Windows Device manager.
Right-click on the Start menu and select Device Manager.
Under "Display Adapters" you should see the type and
number of video cards you have installed.
- 91 -