Selecting A Source - Planar WN-5040-720 User Manual

4.1 Selecting a Source

The "source" is the picture coming into the Margay. It may be from a computer, a video, or a DVD
player.
Selecting the source
1. Press on the remote.
MENU
2. Select and press
PICTURE
3. Select and press the l
SOURCE
4. Choose the source you want and press
5. Press again to close all menus.
MENU
Selecting a source means choosing an input connec-
tor so you can see the picture coming into that input.
If the source you select is not there, you will see a
Source Absent message on the screen. This usually
means there is no picture coming into that connector,
or the picture is not valid.
This message means Analog 2 is selected now, but
there is no picture coming to that connector.
68
.
ENTER
key.
EFT ARROW
.
ENTER