Memory: Save - Planar WN-5040-720 User Manual

Memory: Save

In the Save grid, use the arrow keys to cycle through the
available memories. As you navigate through all 40
memories, Save Now will show (Overwrite), as shown
here, if the slot already has something in it.
For each empty memory, the Name of the memory is the
default name for this slot. You can change this name as
described below. Many lines are grayed out because
you can't change anything here except the name of the
memory. The lines in this menu are different for saving
different modes: video or digital.
(Overwrite) appears if the Save to Slot number currently
has something saved in it.
To save, highlight Save Now and press
A (Current) notice will appear in Save to Slot to indicate
that the save was successful and that the slot now con-
tains exactly what the
To change the Name of a memory slot, highlight Name
and press . A bar appears below the name which
ENTER
indicates character position. Use the +/– arrows to
move the yellow highlight in this bar. Use the up-down
arrows to change the character at that position. There
are 24 character spaces available.
The default name is an abbreviation of the memory con-
tents: connector used, resolution, wall configuration and
wall position (if wall mode is on).
102
.
ENTER
Margay
is doing now.
Press twice
SAVE
to open this menu
directly.
ENTER