Planar WN-5040-720 User Manual page 42

When Margays are installed in a row, the
screens are very close together.
Pulling a screen from the outside of the row
causes it to bind with its neighbor.
The proper way is to make the first pull on the
neighboring edge of an outside row.
Then pull the outer edge to release all the
spring latches.
View from above a row of Margays
Top of Margay 2
Top of Margay 1
Screen 1 Screen 2
Top of Margay 1 Top of Margay 2
Screen 1 Screen 2
Pulling a screen
from the outside edge.
DON'T DO THIS!
Top of Margay 1 Top of Margay 2
Screen 1 Screen 2
Top of Margay 1 Top of Margay 2
Screen 1 Screen 2
Top of Margay 3
Screen 3
Top of Margay 3
ouch
Top of Margay 3
Pull the inside edge
of the column first,
but just a little.
Top of Margay 3
Then pull the
outer edge.
31