ProCurve 2910al-24g Management And Configuration Manual page 538

Troubleshooting
Debug/Syslog Operation
C-50
Syntax: [no] debug < debug-type > (Continued)
event
Event Log messages are automatically enabled to be sent to
debug destinations in these conditions:
• If no Syslog server address is configured and you enter
the logging <syslog-ip-addr> command to configure a
destination address.
• If at least one Syslog server address is configured in the
startup configuration and the switch is rebooted or reset.
Event log messages are the default type of debug message
sent to configured debug destinations.
ip [ rip < database | event | trigger > ]
rip < database | event | trigger > — Enables the specified RIP
message type for the configured destination(s).
database— Display database changes.
event— Display RIP events.
trigger— Display trigger messages.
ip [fib]
fib: Displays IP Forwarding Information Base debug
messages.
lldp
Enables all LLDP message types for the configured destina­
tions.