ProCurve 2910al-24g Management And Configuration Manual page 535

Example. The next example shows how to configure:
■ Debug logging of ACL packet messages on a Syslog server at 18.38.64.164
(with user as the default logging facility).
Display of these messages in the CLI session of your terminal device's
■
management access to the switch.
Blocking Event Log messages from being sent from the switch to the
■
Syslog server and a CLI session.
To configure Syslog operation in these ways with the Debug/Syslog feature
disabled on the switch, you would enter the commands shown in Figure C-18.
Troubleshooting
Debug/Syslog Operation
C-47