Subnetmask - Toshiba e-studio16 Administrator's Manual

1. TCP/IP CONFIGURATION SETUP (Cont.)

Subnetmask

This setting is used to assign the Subnetmask if required.
1
1 Enter the Subnetmask, then press the
• SUBNET MASK
2
Enter the subnet mask to determine what subnet an IP
address belongs to if required. "000.000.000.000" and
"255.255.255.255" cannot be assigned for the Subnetmask.
2
Press the
3
• The display returns to the NETWORK menu.
• If you want to change another TCP/IP network setting,
4
change the setting before pressing the
3 Press
network settings and start initializing.
5
• After 2 seconds, the Operation Completed message is
displayed and returns to the INITIAL SETUP menu. It may
take few minutes to finish initializing the Network Interface
Card.
6
• If you want cancel the TCP/IP setting, press the
before selecting "01.COMPLETE".
7
8
9
10
11
12
2-6
FUNCTION SETTINGS
[PROGRAM], [0], [3], [0], [4], [0], [2], [0], [3]
key.
to select "01.COMPLETE". Save the
key.
SUBNET MASK
000.000.000.000
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
key.
NETWORK
Initializing
NETWORK
key
Operation Completed
INITIAL SETUP
01.DATE & TIME
02.LANGUAGE
03.TERMINAL ID