Ip Address - Toshiba e-studio16 Administrator's Manual

IP Address

This setting is used to assign the IP address of this machine. Do not set this when the IP address is
obtained from the DHCP server. The machine uses the IP address here even if the BootP/DHCP is set
to be enabled.
1 Enter the IP address, then press the
• IP ADDRESS
Enter the IP address of this machine. "000.000.000.000"
cannot be assigned for the IP address.
2 Press the key.
• The display returns to the NETWORK menu.
• If you want to change another TCP/IP network setting,
change the setting before pressing the
3 Press to select "01.COMPLETE". Save the
network settings and start initializing.
• After 2 seconds, the Operation Completed message is
displayed and returns to the INITIAL SETUP menu. It may
take few minutes to finish initializing the Network Interface
Card.
• If you want cancel the TCP/IP setting, press the
before selecting "01.COMPLETE".
[PROGRAM], [0], [3], [0], [4], [0], [2], [0], [2]
key.
key.
key
IP ADDRESS
000.000.000.000
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
NETWORK
Initializing
NETWORK
Operation Completed
INITIAL SETUP
01.DATE & TIME
02.LANGUAGE
03.TERMINAL ID
1
2
3
4
5
6
7
8
9
10
11
12
2-5